Penggunaan Common-Mode Filter dan Differential-Mode Filter Pada EMI Driver Lampu LED

Authors

  • Djoko Anwar Mardiono Universitas Batam
  • Gunawan Toto Hadiyanto Universitas Batam
  • Intan Kumala Sari Universitas Batam

DOI:

https://doi.org/10.37776/zt.v15i2.811

Keywords:

EMI, Common-Mode Filter, Differential-Mode Filter

Abstract

Power Energy  efficiency for public application commonly used driver IC  that operate by (Pulse Width  Modulation) PWM, The effect of this implementation will generate EMI (Electromagnetic Interference) that can make  radio signal distortion or other electronic distortion in the around device area. The action to reduce the  signal distortions shall use Filter implementation in the electronic device circuit. The filter to reduce signal distortion are  power line filter or ferrite beads filter. Power line filter used for reduce and to filtering  noise signal from Power line source from PLN power line or from power line distribution Conduction emission., The ferrite beads filter implementation for noise reduction or filtering from Source power supply to load. Implement of both filters at the circuit diagram will impact to reduce noise signal that make distortion to the signal source.

Author Biographies

Djoko Anwar Mardiono, Universitas Batam

Teknik Elektro, Universitas Batam, Batam,Indonesia

Gunawan Toto Hadiyanto, Universitas Batam

Teknik Elektro, Universitas Batam, Batam,Indonesia

Intan Kumala Sari, Universitas Batam

Teknik Elektro, Universitas Batam, Batam,Indonesia

References

Eadie A. (2014). Minimizing EMI from LED Lighting – Case Study, EMC Fastpass.https://emcfastpass.com

Fairchild datasheet. (2016). FL77944 12 W Downlight AC LED Driver at Low Line, Fairchild Semiconductor.

Lun TC. (2005). Designing for Board Level Electromagnetic Compatibility, Freescale Semicoductor Aplication Note AN2321 Rev 1.

Mohammad Yanur H, Noptin Harpawi, dan Syaifullah, "Modifikasi Frekuensi Switching pada LED Driver Menggunakan Oscillator Lorenz Analog untuk Mereduksi Conducted EMI", Jurnal ELEMENTER Vol. 6, No. 2, November 2020, pp 53-61.

Ott. H. W. (1988). Noise Reduction Techniques in Electronic System, John Wiley & Sons, USA.

PMicro. (2013). PL3536C PWM Power Switch, Datasheet V1.0, Powerlink Microelectronics https://www.pmicro.com.cn

Siska Novita Posma, Oddy Rifandi dan Mohammad Yanuar, “Perancangan Filter EMI Pasif dalam Rangka Mitigasi Conducted emission pada Lampu LEDâ€, Jurnal ELEMENTER Vol. 5, No. 1, November 2019, pp 71-81.

Y. C. Tsai, T. J. Liang, K. H. Chen, and L. P. Y. Ting, “Design and implementation of single-stage LED driver with high frequency pulse†in 2nd International Future Energy Electronics Conference, IFEEC 2015, 2015, pp. 1–6.

Downloads

Published

2021-12-29

Issue

Section

Articles